Filling The Engine With Oil; Before Operating - Toro 20058 Operator's Manual

3. Rotate the handle rearward.
A.
B.
m-8110
4. Attach the handle
brackets (A) to the lower
handle sides.
Note: Insert a lock
washer between
each bracket and
knob, and tighten the
lower handle knob as
tight as you can by
hand.

Before Operating

Gasoline is extremely flammable and explosive. A fire or explosion from gasoline can
burn you and others.
S
To prevent a static charge from igniting the gasoline, place the container and/or
mower directly on the ground before filling, not in a vehicle or on an object.
S
Fill the tank outdoors when the engine is cold. Wipe up spills.
S
Do not handle gasoline when smoking or around an open flame or sparks.
S
Store gasoline in an approved fuel container, out of the reach of children.
m-8109
A
m-8097
Danger
3352-864 Rev B
7

Filling the Engine with Oil

Important: Your mower does not come with oil in the
engine.
1. Remove the dipstick.
m-8098
2. Slowly pour oil into the oil fill tube until the oil
level reaches the Full line on the dipstick. Do not
overfill. (Max. fill: 20 oz., type: SAE 30W detergent
oil with an API service classification of SF, SG, SH,
SJ, SL, or higher.)
3. Install the dipstick securely.
Important: Change the engine oil after the first
5 operating hours; change it yearly thereafter. Refer
to Changing the Engine Oil on page 17.
m-8099/m-5571