Adjusting The Cutting Height; Using The Self-Propel Drive; Stopping The Engine - Toro 20833 Operator's Manual

Figure 13
Note: If the mower still does not start, contact an
Authorized Service Dealer.

Using the Self-propel Drive

To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the mower will automatically keep pace with
you (Figure 14).
Figure 14

Stopping the Engine

Release the blade control bar (Figure 15).
Figure 15
Important: When you release the blade control
bar, both the engine and blade should stop within
3 seconds. If they do not stop properly, stop using
your mower immediately and contact an Authorized
Service Dealer.

Adjusting the Cutting Height

1. Stop the engine and wait for all moving parts to stop.
2. Press down on the cutting height adjustment button
and hold the cutting height adjustment handle to
move the cutting height up or down (Figure 16).
1. Cutting height adjustment
handle
3. Lift up or press down on the handle, and use the
pointer and the cutting height setting on the link rod
to set the lawn mower to the desired cutting height
(Figure 17).
1. Link rod
2. Cutting height setting
9
Figure 16
2. Cutting height adjustment
button
Figure 17
3. Pointer