Identifying Controls - Panasonic TH-P42G15A Operating Instructions Manual

This TV could fall over if it's pushed, pulled or knocked down.
We therefore recommend the TV is secured to the base as illustrated.
●
This measure is designed to reduce the risk of injury from a falling TV. However, it cannot guarantee protection in
all cases.
Fall-prevention parts
Band
●
TKLA4301
Securing to a base
Fix pedestal and base together with band.

Identifying Controls

SD card slot
HDMI4
terminal
PC terminal
AV4 IN
terminals
Headphone
jack
Mains power On / Off
●
Switch On to turn on the TV or turn the TV
to standby mode by the remote control
Preventing the TV from falling over
Clamp
●
TKL3DA0101
This image is for illustrative purposes only.
C.A.T.S. (Contrast Automatic Tracking System) sensor
●
Remote control signal receiver
●
Do not place any objects between the TV remote control signal receiver
and remote control.
Screw
Clamp
TV
Function Select
●
Volume / Contrast / Brightness /
Colour / Sharpness / Tint (NTSC mode) /
Bass / Treble / Balance / "Digital TV Auto
Tuning" or "Analogue TV Auto Tuning"
(p. 24 - 25)
Change the channel up/down. When
a function is displayed, press up/down
to adjust the setting of the selected
function. When in standby mode,
switches TV on.
Change the input mode
Power LED
●
Standby: red
On: green
●
When using the remote control,
indicates the TV has received a command.
Senses brightness to adjust picture quality when "Eco Mode"
in the Picture Menu is set to "On" (p. 24)
Wood screw
Screw
Band
Wood screw
9