FAQs
Cannot connect to the network
Cannot operate VIERA CAST
TV takes so long to turn on
The programme cannot be
changed
The programme cannot be
selected
TV goes into "Standby mode"
The remote control does not
work
56
Problem
●
Check the LAN cable is connected properly. (p. 44)
●
Check the connections and settings. (p. 44 - 47)
●
Check the network equipment and network environment.
If the problem persists, consult your Internet Service Provider or
telecommunications company.
●
Check the connections and settings. (p. 44 - 47)
●
The server or connected line might be busy now.
●
Like your computer, the TV has to run a number of diagnostic and
software checks before it can display any programmes.
●
Is the TV in Teletext mode? (p. 18)
●
Is the programme skipped? (p. 29)
●
Off Timer function is activated.
●
The TV enters "Standby mode" about 30 mins. after analogue
broadcasting ends.
●
Are the batteries installed correctly? (p. 7)
●
Has the TV been switched On?
Actions