before you begin
settinG the CloCk
When the appliance is first plugged in, the display lights up. (example 15:15)
When connecting the power for the first time, please use the product after setting the time.
1. Turn the moDe seleCtor to the "off"
position.
2. Press CloCk. The "12" starts blinking.
3. Turn the mUlti-fUnCtion seleCtor to set
the hour.
4. Press CloCk again. The "00" starts blinking.
5. Turn the mUlti-fUnCtion seleCtor to set
the minutes.
6. Press CloCk again.
If you want to change a setting after you have pressed a button, the setting
starts blinking. You can only change this setting during blinking. If it has
stopped blinking, you have to press the button so it will start blinking again.
NQ50C7935ES_EU_DG68-00471E-01_EN.indb 17
English - 17
2014-10-23
12:02:21