Initial Setup - Samsung 9000 User Manual

Series 9
Hide thumbs Also See for 9000:
Table of Contents

Advertisement

Available languages

Available languages

2. Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. During Initial Setup, your TV pairs with the
Samsung Smart Control, connects to your home network, implements Smart Hub agreements, links to the source of your live
TV signal, and sets up control of your cable or satellite box.
Information You Need
Have the following information on hand before you turn on
your TV for the first time:
Your wireless network's password. (Make sure your
network is on.)
Your Postal or Zip code.
The name and location of your cable or satellite
provider (if you use one).
Running Initial Setup
1. Point the Samsung Smart Control at the TV.
2. Press the
button on the Samsung Smart Control to turn on the TV,
and then follow the directions on the screen.
Once your Samsung Smart Control has paired, you can use the Samsung
Smart Control to move the pointer on the screen. Place a finger on the
button, and then move the Samsung Smart Control. The pointer
POINTER
on the screen moves in the direction you moved the Samsung Smart
Control. To select items, press the POINTER button. For more information
about using the Samsung Smart Control, see "The Samsung Smart Control
" on page 7.
To learn more about operating your TV and its Smart Features, launch the TV's built in e-Manual after you have completed the
Initial Setup. For information about the e-Manual, see "The e-Manual" on page 10.
Using the TV Controller
You can use the TV Controller on the back of the TV instead of the remote control to control most of the functions of your
TV. Move the Control Stick up, down, left, or right to move the cursor. Press the Control Stick to select or activate the item
highlighted by the cursor.
Internet Access
The TV must be connected to the Internet to use the Smart
Features. If you have a wireless network, confirm that your
network router is working before you start the initial setup.
If you have a wired network, connect the TV's LAN port to
the network with an Ethernet cable before you begin (CAT 7
cable preferred).
Control Menu
: Opens Smart Hub .
: Opens the menu.
: Selects a source.
: Turns off the TV.
Control Stick
The Control Stick is located on
the lower left corner of the back
of the TV.
English - 6

Advertisement

Table of Contents
loading

Table of Contents