Listening To Cd And Usb Devices - Yamaha ISX-803 Owner's Manual

The unit will operate as follows when playing back tracks/files on CD/USB devices.
• If the CD/USB device being played back is stopped, the track that was being played back will start playing from the beginning of the
track the next time playback begins.
• If you press on the remote control while playback is stopped, the next time playback begins, the unit will play tracks as follows:
– For audio CD:
– For data CD/USB device: from the first track of the folder that contains the track that was played last.
• This system enters standby mode automatically if 20 minutes have elapsed without any playback and no operation is performed after
CD/USB device playback is stopped.
y
For details on playable discs and files, refer to "NOTES ON DISCS AND USB DEVICES" (☞ P. 23).
Listening to an audio CD
Top panel
AUTO 2 SET
1
DIMMER
USB
VOLUME SOURCE ALARM SNOOZE SLEEP
1
1
Press SOURCE to set CD as the playback source.
Using the remote control
Press CD.
If a CD is already inserted, playback will start.
2
Insert the audio CD into the disc slot with the label
side facing toward the front of the unit.
Label side
Playback starts automatically. The track number is shown for a
while when starting playback or skipping tracks.
CD

LISTENING TO CD AND USB DEVICES

from the first track of the CD.
SOURCE + BEEP
2 BEEP
1 SOURCE
CLOCK ALARM TYPE
LABEL SIDE
PRESET
Track number
Use the following buttons to control the unit while playing
back tracks on audio CDs.
Button
Top
Panel
2
Remote
control
+10
Note
CDs cannot be inserted or ejected when the system is in Eco Standby
mode (☞ P. 2).
Function
Play/Pause
/
Skip
/
Search backward/forward
(press and hold down)
Eject the CD
Play/Pause
Skip
/
Search backward/forward
(press and hold down)
Stop
Repeat playback (☞ P. 9)
Shuffle playback (☞ P. 9)
Skip 10 tracks/files
7
En