Product Overview; Checking The Tire Pressure; Checking The Skids And Scraper - Toro Power Max 828LE Operator's Manual

Figure 13
2. Install the dipstick securely.
Note: Do not spill oil around the oil fill tube; oil could
leak onto traction parts and cause the traction to slip.

6. Checking the Tire Pressure

The tires are overinflated at the factory for shipping. Reduce
the pressure equally in both tires to between 17 and 20 psi
(116 and 137 kPa).
7. Checking the Skids and
Scraper
Refer to Checking and Adjusting the Skids and Scraper in
Maintenance.

Product Overview

Figure 14
1. Auger/impeller lever
2. Speed selector lever
3. Quick Stick™ discharge chute
control
4. Traction lever
5. Headlight
6. Fuel tank
7. Engine oil ll tube/dipstick
Figure 15
1. Ignition switch
2. Choke
3. Throttle
Figure 16
1. Snow cleanout tool (attached to the handle)
9
8. Chute deector
9. Discharge chute
10. Fuel shutoff valve
11. Skid (2)
12. Auger
13. Scraper
4. Primer
5. Electric starter
6. Recoil starter