Advertisement
5. Maintenance
• A damaged power cord must only be replaced by an authorized service agent.
• Do not leave the appliance plugged in. Unplug from the outlet when not in use and
before servicing.
• Do not use with any opening blocked; keep free of dust, lint, hair, and anything that
may reduce air flow. Do not put any object(s) into openings.
• Clean only with a dry or slightly damp cloth when disconnected from the power supply.
Never immerse in water.
• The plug connectors must not come in contact with water. These items may only be
cleaned with a dry cloth, no moisture must touch them.
• Do not attempt any repairs other than performed by an authorized service agent.
• The manufacturer cannot be held responsible for any work performed by an unauthorized
service person.
6. Cleaning and Care
Cleaning the filter
The dust cup should be emptied and the filter cleaned after each use, or at least on a
monthly basis. To do so, the following steps should be followed.
1. Press the release button to remove the dust bag and filter assembly from the main body
of the vacuum cleaner. Additionally, remove the small sponge motor filter.
2. Remove the main filter from the housing.
3. Tap the loose dust away from both filters.
4. Rinse with luke - warm water.
5. Stand all parts in free air to dry.
6. When completely dry, reassemble the filter and dust bag and replace the motor filter.
Reattach the assembly to the main body.
Warning:
1. Never operate the appliance without the dust filter and dust bag in their correct position.
Always make sure that the appliance is not connected to any power supply when performing
any cleaning or maintenance activities.
2. Always ensure that both filter and dust bag are totally dry before placing them in the
appliance. Always unplug the appliance from the mains supply socket after use and before
cleaning.
6
Hide quick links:
Advertisement
