LG WD1070FH Instruction Manual page 22

WD(M)-8070F(H)B, WD(M)-1070(5)F(H)B, WD(M)-1170(5)F(H)B, WD(M)-1270(5)F(H)B, WD(M)-1370(5)F(H)B
(1)
3
2
1
S P I N T R O U B L E
Check on the spinning, is the frequency of the
water level 248 or more. The frequency can be
checked by pressing the [Option] and [Spin] buttons at
the same time on the program.
When pressing [Spin], [Temp.] and POWER buttons
at the same time after power off, press the
START/PAUSE button 2 times, is the drum low speed
spin?
Is it disconnected, or disassembled?
¡a Red:3pin(1)¡b
Check the motor connector, is the resistance of
the terminal same as the figure?
MOTOR TERMINAL
¤ ¤Ł ¤Ø
Resistance of terminal:
¤ ~ ¤Ł / ¤Ł ~ ¤Ø / ¤Ø ~ ¤ : About 6.5§
Replace the PWB assy (Main)
YES
NO
NO
YES
28
Check the sensor
(Pressure) or hose
(Sensor).
NO
If the problem is on the
sensor or the hose, replace
the sensor or the hose.
Normal
YES
YES
Correct the connector.
Replace the motor assy.
NO
(4681FR1241C)