Signal Information - Samsung PS42A456 User Manual

4.4 Common Interface
− Installing the CI Card
 Purchase the CI CAM module by visiting your nearest
dealer or by phone.
 Insert the CI CARD into the CAM in the direction of the
arrow until it fits.
 Insert the CAM with the CI CARD installed into the
common interface slot.
➢
Insert the CAM in the direction of the arrow, right up
to the end so that it is parallel with the slot.
 Check if you can see a picture on a scrambled signal
channel.
➢
You can install the CAM anytime whether the TV is
ON or OFF.
4.5 System
This menu consists of 5 sub-menus:
Product Information, Signal Information, Software
Upgrade, and Reset.
− Product Information
You can view your product information. For service or repair,
please contact a Samsung approved dealer.
 Press the ENTER button with Product Information
selected. The product information menu is displayed.
− Software Version / Firmware Version

− Signal Information

You can get information about the signal status.
 Press the ENTER button with Signal Information
selected. The technical information for signal status is
displayed.
− Service / Service ID / Multiplex / Network / Bit
error level / Signal Strength
English - 40
DTV
Application Info.
Type: CA
Manufacturer: Canal Plus
Info: Top Up TV
Return
CI Menu
Move Enter
DTV
Setup

Audio Format :PCM
Audio Description
Common Interface
System
Move Enter
DTV
System
Product Information
Signal Information
Software Upgrade
Reset
Move Enter
DTV
Product Information
Software Version: T-NHBTEDEUC-04
Firmware Version: T-EMMADEUB-010
Return
DTV
Signal Information
Service: ?
Service ID: 0000
Multiplex: ? (TSID 0000,ONID 0000)
Network: ? (ID 0000)
Bit error level: 10
Signal Strength: 0
Return
Continued...
Exit


Return




Return