Trying The Camera Out; Shooting Still Images - Canon PowerShot SX600 HS Getting Started

Trying the Camera Out

Trying the Camera Out
Shooting
For fully automatic selection of the optimal settings for specifi c scenes,
simply let the camera determine the subject and shooting conditions.
Turn the camera on and enter
1
[ ] mode.
Press the ON/OFF button.
Set the mode switch to [4].
Press the <m> button, press the
<o><p> buttons to choose [
then press the <m> button again.
Press the <o><p> buttons to choose
[ ], and then press the <m> button.
Compose the shot.
2
To zoom in and enlarge the subject, move
the zoom lever toward <i> (telephoto)
as you watch the screen, and to zoom
away from the subject, move it toward
<j> (wide angle).
Shoot.
3

Shooting Still Images

Press the shutter button lightly ( ).
The camera beeps twice after focusing,
and AF frames are displayed to indicate
image areas in focus. Press the shutter
button all the way down ( ).
If [Raise the fl ash] appears on the screen,
move the <h> switch to raise the fl ash.
It will fi re when shooting. If you prefer not
to use the fl ash, push it down with your
fi nger, into the camera.
], and
7