Toshiba W808 Service Manual page 68

Fig. 1-6-7 FL drive slider
Fig. 1-6-8 Joint Gear 1
Fig. 1-6-9 FL cam gear
12. When mounting the joint gear 1 (8), mount it so that
the cutout portion of the gear is faced with the
direction of the FL cam gear (7).
Cutout portion
Fig. 1-6-10
Apply grease to the
shaded portion .
Apply grease to the
shaded portion .
Two holes (Super-V DASH)
Apply grease to the
shaded portion .
Joint gear 1 (8)
13. When mounting the FL cam gear (7), align the mark
of the FL cam gear (7) with the center of the worm
wheel (9).
Fig. 1-6-11
14. When mounting the joint gear 2 (6), align the mark of
the joint gear (8) with the mark of the cam slider (10).
Joint gear 1 (8)
Align marks.
Fig. 1-6-12
15. Mount each part in the reverse order of removal.
FL cam gear (7)
Mark
Worm wheel (9)
Align marks.
Joint gear 2 (6)
Cam slider (10)