Bluetooth Operation - Dual DV695MB Installation & Owner's Manual

Preparation
Pairing a New Device
Connecting a
Paired Device
Bluetooth Phone
Main Menu
Current Mode Indicator
Phone Keypad
Redial
Backspace
Talk
End Call
2
1
Before you can use a Bluetooth device, it must be paired and
connected. Make sure that Bluetooth is activated on your device
before you begin the pairing process.
The unit broadcasts the pairing signal constantly when no
devices are currently connected. Complete the pairing sequence
from your Bluetooth device. Refer to the owner's manual for
your device for more details. The device name is "Dual BT".
The Bluetooth passcode "0000".
operation when pairing is performed.
Note: On certain phones, pairing may need to be done more than
once if there are connectivity issues.
Most Bluetooth devices support the auto-connect feature and will
connect automatically if the device is in range when the unit is
powered-on. If your device was previously paired but does not
connect, enter the Bluetooth setup menu and ensure that Auto
Connect is On.
To access the phone, select Bluetooth Phone from the Main Menu
or press the phone icon from any operational mode.
Press to return to the Main Menu screen.
1
Displays current mode of operation.
2
Use the phone keypad to dial the desired phone number.
3
Alternately, numbers can be dialed directly from the phone.
Press to redial the last number called.
4
Press to backspace when typing a number with the keypad.
5
Press to connect a call.
6
Press to end a call.
7
DV695MB

Bluetooth Operation

3
The unit can be in any mode of
OPERATION
4
5
6
7
24