Software Upgrade; Using Tv Functions - Samsung HW-H550 User Manual

functions
POWER
TV POWER
POWER POWER
TV POWER TV POWER
AUTO AUTO
POWER SPEAKER TV SOURCE POWER SPEAKER TV SOURCE
SOURCE SOURCE
SoundConnect SoundConnect
REPEAT REPEAT
TV VOL TV VOL TV CH TV CH AUDIO SYNC AUDIO SYNC
TV MUTE TV MUTE TV INFO TV INFO TV PRE-CH TV EXIT TV PRE-CH TV EXIT
POWER POWER
TV POWER TV POWER
AUTO AUTO
POWER SPEAKER TV SOURCE POWER SPEAKER TV SOURCE TV SOURCE
SOURCE SOURCE
SOUND EFFECT SOUND EFFECT SMART VOLUME SMART VOLUME
VOL VOL
SoundConnect SoundConnect
REPEAT REPEAT
S/W S/W S/W S/W
MUTE MUTE
LEVEL LEVEL LEVEL LEVEL
TV VOL TV VOL TV VOL TV CH TV CH TV CH AUDIO SYNC AUDIO SYNC
VOL VOL
3D D SOUND LIFT 3D SOUND LIFT D
TONE TONE
TV MUTE TV MUTE TV INFO TV INFO TV INFO TV PRE-CH TV EXIT TV PRE-CH TV EXIT TV PRE-CH TV EXIT
SOUND EFFECT SOUND EFFECT SMART VOLUME SMART VOLUME
AH59-02612B AH59-02612B
VOL VOL
S/W S/W S/W S/W
MUTE MUTE
LEVEL LEVEL LEVEL LEVEL
VOL VOL

SOFTWARE UPGRADE

3D D SOUND LIFT 3D SOUND LIFT D
TONE TONE
Samsung may offer upgrades for the Wireless Audio - Soundbar's system
firmware in the future.
AH59-02612B AH59-02612B
If an upgrade is offered, you can upgrade the firmware by connecting a USB drive
with the firmware upgrade stored on it to the USB port on your Soundbar.
Note that if there are multiple upgrade files, you must load them onto the USB
drive singly and use them to upgrade the firmware one at a time.
Please visit Samsung.com or contact the Samsung call center to receive more
information about downloading upgrade files.
▪
Insert a USB drive containing the firmware upgrade into the USB port on the main unit.
▪
Do not disconnect the power or remove the USB drive while upgrades are being applied. The main unit will turn off
automatically after completing the firmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the upgrade.
▪
Once upgrading the product software is completed, turn off the product and then press and hold (@) button for a while to reset
the product.
▪
If the firmware fails to upgrade, we recommend formatting the USB device in FAT16 and trying again.
▪
For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported file system.
▪
Depending on the manufacturer, some USB devices may not be supported.
22
Using the Anynet+(HDMI-CEC) function
Anynet+ lets you control other Samsung Devices with your Samsung TV's remote
control.
The Anynet+ function turns on and off each time you press Anynet+.
1. Connect the product to a Samsung TV with an HDMI cable.
(See page 13)
2. Set the Anynet+ function on your TV and the Soundbar to ON. (See the TV
instruction manual for more information.)
▪
Depending on your TV, certain HDMI output resolutions may not work.
▪
Please refer to the user's manual of your TV and check for the
(If your TV has an
Using the TV functions (with Samsung TVs only)
• Press TV SOURCE on the remote control to change the TV's input source.
• Press TV INFO on the remote control to display the TV channel information.
• Press TV CH on the remote control to select the TV channel.
• Press TV VOL on the remote control to increase or decrease the volume level.
• Use TV PRE-CH button to move to the previous TV channel in TV mode.
• To exit the TV menu, use the TV EXIT button. (It functions the same as the EXIT
button of the TV remote control.)
▪
When you press the SoundConnect button, the TV's sound is
transmitted through the Soundbar system via a Bluetooth connection.
The Soundbar also controls the sound volume, sound quality, etc.
▪
The remote control can operate TVs made by SAMSUNG only
logo, then it supports the Anynet+ function.)
logo
.