Safety Information - Rangemaster RMB60HPNGFGL User Manual

Check the appliance is electrically safe and gas sound when you have finished.

Safety Information

Ensure that the gas supply pipe is never able to touch
moveable parts of the built-in cabinet (e.g. drawers). It must
not pass through compartments that could be used for
storage purposes.
When using a flexible hose, it is essential to comply with the
following instructions:
• No part of the pipe must be able to touch parts the
temperature of which exceeds 75°C
• The pipe must not be pulled or twisted, throttled or
tightly bent.
• It must not come into contact with sharp edges or
corners.
• It must be easy to inspect the entire pipe length in order
to check its state of wear.
• The pipe must be replaced within the date stamped on
the pipe itself.
If in doubt, contact your supplier.
After completing the gas connection check the hotplate is
gas sound with a pressure test.
Pressure Testing
The gas pressure can be measured at one of the hotplate
burner injectors (not the Wok burner). Lift off a burner head.
Fit the pressure gauge to the injector. Turn on and light one
of the other hotplate burners. Turn on and push in the control
knob for the burner with the pressure gauge fitted to let gas
through.
Refer to the "Connections" table in the "Technical Data" for
pressure settings
Turn off the burners. Reassemble burner top, making sure it is
reassembled in the correct way on the burner body.
INSTALLATION
18