Service Adjustments - Sanyo CE32FWH1F-C Service Manual

SERVICE ADJUSTMENTS

[After replacing the Menory IC (IC803)]
The memory IC, IC803, stores the feature setting data of TV set and service adjustments data for each circuit,
therefore, when the memory IC is replaced, it should be performed by following "FEATURE SETTING" and
"SERVICE ADJUSTMENT".
[FEATURE SETTING]
To enter to the Feature Setting Mode
+ Press and hold the "GREEN" button on the remote control and P
adjustment window will appear on the screen.
+ Highlight the FEATURE memu by using the
change to the feature setting window.
SELECT:
To set the feature mode
+ Highlight the desired feature item by using the
+ To change the feature mode, use the
+ The data which is set in the feature mode is stored into the memory IC automatically.
Following table shows the available feature items and default setting. (The features of item DOLBY AUTO BAL
mode will not operate properly even if the mode can be selected.)
Feature items
ON-TIMER
SORT MODE
PLUG & PLAY
WELCOME TEXT
CODE TEST
WSS
AUTO VOLUME
DOLBY AUTO BAL OFF or ON
Exit from the Feature Setting Mode
+ Press the RECALL button on the remote control.
WB5-B chassis
ADJUST
Ver 1.0
REGULAR
WIDE
OTHERS
FEATURE
TDA9320
TDA9330
TDA9178
TC90A36
OK
EXIT : RECALL
or
Mode
ON or OFF
AUTO TUNE/SORT
or AUTO TUNE
or ATS EURO PLUS
ON or OFF
ON or OFF
OFF or ON
OFF or ON
ON or OFF
button on the front control panel. The
or button and then press the OK button. The window will
ON-TIMER
SORT MODE
PLUG & PLAY
WELCOME TEXT
CODE TEST
WSS
AUTO VOLUME
DOLBY AUTO BAL
=>
or button.
button.
Description & Note
On-timer available, default "ON"
Tuning mode, default "ATS EURO +"
Plug & Play mode,default "ON"
Display message when first set up, default "ON"
For factory use, default "OFF"
Wide Screen Signaling available , default "ON"
Auto Volume function available, default "OFF"
Dolby Auto balance mode, default "OFF"
11
FEATURE
ON
ATS EURO +
ON
ON
OFF
ON
OFF
OFF
ADJUST : EXIT : RECALL