Authentication (If The Quick Authentication Method Fails) - Samsung WF12F9 series User Manual

smart control

Authentication (if the quick authentication method fails)

1. The "Authentication" only needs to be run with
the initial setup. Touch the "Indoor control" tab
to search for the washer's name. Once the
washer's name is displayed touch tab.
2. Verify the that the Wi-Fi icon is not blinking.
Press the Temp + Start/Pause buttons
simultaneously for 5 seconds. "AP" will now be
displayed.
3. After you touch the washer name tab you need to touch the "OK" tab
to proceed with the certifi cation.
ARNO-WIFI_F900E-03285E-02_EN_150722.indd 46 ARNO-WIFI_F900E-03285E-02_EN_150722.indd 46
English - 46
2015-07-24 2015-07-24 10:56:22 10:56:22