Table of Contents
Advertisement
Installation
Note: to install Sapera LT and the GigE Vision package, logon to the workstation as an administrator or with
an account that has administrator privileges.
When Linea GigE is used in a Sapera development environment, Sapera LT 7.50 needs to be
installed, either before or after the camera software package (GigE Vision and Network Imaging
package). If using Sapera LT 8.0 or later, all GigE Vision support for cameras is automatically
installed.
If no Sapera development is required. then the Sapera LT SDK is not needed to control the
Linea GigE camera. Sapera runtime with CamExpert provides everything to control the camera.
Procedure
Download and install Sapera 8.0 which automatically provides GigE Vision support.
•
If using Sapera 7.2 or 7.5, download the Teledyne DALSA GigE Vision package and install the
•
Software which includes the Network Imaging driver, and the Sapera GigE server.
Contact Teledyne DALSA concerning the GigE Vision package supporting TurboDrive™
•
technology.
Optional: If the Teledyne DALSA Sapera LT SDK package is not used, click to install the Linea
•
GigE firmware and user manuals only. Follow the on screen prompts.
•
Connect the Linea GigE camera to an available free Gigabit NIC.
Refer to Sapera LT User's Manual concerning application development with Sapera.
Note: The Teledyne DALSA Sapera CamExpert tool (used throughout this manual to describe Linea GigE
Vision features) is installed with either the Sapera LT runtime or the Sapera LT development package. If
Sapera application development is required, install Sapera (7.50 or later for all firmware support) as
described in the previous section.
Camera Firmware Updates
The user can upload new firmware, downloaded from Teledyne DALSA support, using the File
Access Control features via Sapera CamExpert.
Linea GigE Series Camera
Using Linea GigE with the Sapera API • 19
Advertisement
Table of Contents
