Panasonic HDC-SDT750 Operating Instructions Manual page 106

∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the
images correctly. (Check the TV setting.)
: [SETUP] # [TV ASPECT] #
[4:3]
Example of images with a 16:9 aspect
ratio on a regular TV (4:3)
[TV ASPECT] setting
[16:9]
≥ If a wide-screen TV is connected, adjust
the aspect setting on the TV. (Refer to the
operating instructions of the TV for
details.)
Refer to the following support site for information about the Panasonic TVs that you
can directly insert an SD card into the SD card slot on the TV and then play it back.
http://panasonic.net/
≥ It may not be possible to play back scenes on the TV depending on the recording mode.
≥ For details on how to play back, please read the operating instructions for the TV.
106
VQT3B52
∫ To display the on-screen
When the EXT DISPLAY button on the
remote control is pressed, the information
displayed on the screen (operation icon and
time code etc.) can be displayed/not
displayed on the TV.
≥ It will not display when the unit is turned
off.
[4:3]
≥ When the AV multi cable is connected to
this unit, the setup screen of the AV multi
destination is displayed on the screen of
this unit. Touch either [COMPONENT] or
[AV OUT] in accordance with the terminal
connecting to the TV. (l 107)
≥ If the HDMI mini cable and AV multi cable
are connected at the same time, output
will be prioritised in order of the HDMI mini
cable, AV multi cable.
information on the TV
/VOL
EXT DISPLAY
SEARCH PLAY
STILL ADV PAUSE
SKIP STOP
STOP
DATE/TIME
SEARCH
STILL ADV
SKIP