Kenwood TTM610 Instructions Manual page 5

2 Adjust the slot width to suit the
food item . CAUTION: Take
care not to touch the fascia
panel, it may be hot.
3 Insert the bread, muffins, bagels,
croissants etc. Do not force food
items into the toaster.
4 Lower the carriage lever
5 Move the browning control to the
desired setting. Use a low
browning control setting for light
toasting and for thin or dry bread.
6 Select the desired function button.
The selected button and cancel
button lights will illuminate, an
audible beep will be heard and
toasting will begin.
G
To toast bagels the cut face should
be facing the front of the toaster.
G
Note: when toasting using the
bagel button, the front element will
toast with a higher heat than the
element at the back of the toaster.
This will result in only one
side of the item being
toasted.
G
To defrost frozen bread, select the
defrost position
browning control.
G
You can use the carriage lever to
lift the food item to Peek & View™
at any time without cancelling.
7 To stop toasting at any stage,
press the cancel button. The
toaster will emit an audible beep to
indicate toasting is cancelled and
the button lights will go out.
8 When toasting has finished the
toaster will emit an audible beep
and the button lights will go out
and the toasting will stop. The food
item will NOT pop up.
9 Use the carriage lever to raise the
food item.
10 After use, unplug the toaster.
.
on the
to toast food items
using the sandwich
cage
G
Thoroughly cook or re-heat
ingredients such as meat or
fish prior to adding them to
the item to be toasted and
ensure all ingredients are
piping hot throughout before
serving. Do not re-heat
ingredients more than once.
G
Do not leave hot ingredients
to cool before toasting the
food item.
G
Ensure all ingredients
particularly meat or fish are
fresh and used within use-by
dates.
G
Use other vegetable
ingredients at room
temperature to avoid them
chilling the hot cooked
ingredients.
G
When cutting your paninis or
ciabattas etc do not cut all the way
through, instead leave the bottom
side uncut so that it prevents
melted cheese from dripping into
the toaster.
G
Cut ingredients thinly - do not use
large chunks.
G
Take care when using ingredients
that could melt and run out of the
food item. We do not recommend
the use of high fat or similar fillings
that may drip into the toaster as
this will be difficult to clean.
G
Lightly butter the outside surface of
sandwiches and place the filling
inbetween the unbuttered sides.
This helps prevent the outside from
burning. Do not use low fat
spreads, which are not suitable for
toasting.
G
Ensure the food item is evenly
filled.
G
Always use food items that are a
suitable size for the sandwich
cage. Do not force food items into
the toaster.
1 Plug the toaster into the power
supply, an audible beep will be
heard.
5