Assemble Your Device - Samsung Galaxy TAB 4 User Manual

Assemble Your Device

This section helps you to
assemble your device.
Install the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card. During activation,
your SIM card is loaded with your subscription
details, such as your PIN, available optional
services, and other features.
Warning: Please be careful when handling the SIM
card to avoid damaging it. Keep all SIM cards out of
reach of small children.
► Carefully slide the SIM card into the SIM card
slot until the card locks into place.
Make sure that the card's gold contacts face into
the device and that the upper-left angled corner
of the card is positioned as shown.
Caution: If the card is not inserted correctly, the
device does not detect the SIM card. Re-orient the
card and place it back into the slot if the SIM is not
detected.
Getting Started
Install a Memory Card
You can install an optional microSD or microSDHC
memory card (not included) to expand available
memory space.
Note: A memory card can be installed at any time; it
is not necessary to install it prior to using the device.
For more information on installing a memory card,
see Install a Memory
Charge the Battery
Your device is powered by a rechargeable, standard
Li-Ion battery. A Wall/USB Charger (charging head
and USB cable) is included with the device for
charging the battery.
The battery comes partially charged. A fully
discharged battery requires up to four hours of
charge time. You can use the device while charging.
Caution: Use only Samsung-approved charging
devices and batteries. Samsung accessories are
designed to maximize battery life. Using other
accessories may invalidate your warranty and may
cause damage.
1. Insert the USB cable into the port.
2. Connect the USB cable to the charging head,
and then plug the charging head into a standard
AC power outlet.
4
Card.
Assemble Your Device