Samsung Galaxy TAB 4 User Manual page 61

Wi-Fi Options
The Wi-Fi settings menu allows you to set up many
of your device's advanced Wi-Fi services.
1. From a Home screen, tap
2. Tap Wi-Fi, and then tap ON/OFF to turn Wi-Fi on.
More options for options:
3. Tap
•
Scan: Start another scan for nearby Wi-Fi
networks.
•
Wi-Fi Direct: Configure a Wi-Fi Direct
connection with a nearby device.
•
Advanced:
-
Network notification: Receive a notification
when new Wireless Access Points (WAPs)
are available.
-
Sort by: Sort Wi-Fi networks by Alphabet
or Signal strength.
-
Keep Wi-Fi on during sleep: Specify when
to disconnect from Wi-Fi.
-
Always allow scanning: Allow Google
location service and other apps to scan for
networks, even when Wi-Fi is turned off.
-
Smart network switch: Automatically switch
between Wi-Fi and mobile networks to
maintain a stable Internet connection.
-
Install certificates: Install authentication
certificates.
-
MAC address: View your device's
MAC address, which is required when
connecting to some secured networks (not
configurable).
-
IP address: View your device's IP address
(not configurable).
Settings
Apps >
55
•
WPS push button: Set up a connection to a
WPS (Wi-Fi Protected Setup) router or other
equipment.
•
WPS PIN entry: View the PIN used by your
tablet to set up a PIN-secured connection
to a Wi-Fi router or other equipment (not
configurable).
•
Share Wi-Fi profile: Share Wi-Fi profiles you
have created with others.
Wi-Fi Status Indicators
Status bar icons show your current Wi-Fi connection
status:
•
When Wi-Fi is connected, active, and
communicating with a Wireless Access Point
(WAP), displays.
•
If a Wi-Fi access point is available, but your device
is not connected to it,
display if there is a communication issue with the
target Wireless Access Point (WAP).
displays. It may also
Wi-Fi Settings