Assemble Your Device - Samsung Galaxy Tab E User Manual

Assemble Your Device

This section helps you to
assemble your device.
Install the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card.
Warning: Please be careful when handling the SIM
card to avoid damaging it. Keep all SIM cards out of
reach of small children.
1. With the tablet's screen facing up, locate and
open the SIM card slot cover.
2. Carefully slide the SIM card into the SIM card
slot (as shown) until it clicks into place.
3. Close the SIM card slot cover.
Caution: If the card is not inserted correctly, the
device cannot detect the SIM card. Re-orient the card
back into the slot if the SIM is not detected.
Install a Memory Card
You can use an optional microSD or microSDHC
memory card (not included) to expand available
memory space.
Note: A memory card can be installed at any time; it
is not necessary to install it prior to using the device.
For more information on installing a memory card,
see Memory Card (SD
Getting Started
FOR INTERNAL USE ONLY
Card).
Charge the Battery
Your device is powered by a rechargeable, standard
Li-Ion battery. A Wall/USB Charger (charging head
and USB cable) is included with the device for
charging the battery from any standard outlet.
The battery comes partially charged. A fully
discharged battery requires up to four hours of
charge time. You can use the device while charging.
Caution: Use only Samsung-approved charging
devices. Samsung accessories are designed to
maximize battery life. Using other accessories may
invalidate your warranty and may cause damage.
1. Insert the USB cable into the port.
2. Connect the USB cable to the charging head,
and then plug the charging head into a standard
outlet.
3. When charging is complete, unplug the charging
head from the outlet and remove the USB cable
from the device.
Caution: Failure to unplug the wall charger before you
remove the battery, can cause damage to the device.
DRAFT
4 Assemble Your Device