Table of Contents
Advertisement
Shooting Multiple Images Over a Specified Period
(Interval Shot)
You can use the procedure below to record a series of images over a specified period
(Interval Shot). This function is useful when recording the movement of stars, a
blooming flower, etc.
• When using this function, shooting with a tripod is recommended.
• To prevent loss of power while shooting, use a fully charged battery.
• Make sure the memory card you are using has sufficient unused space before
using this function.
• The camera focuses each shot.
1.
Align the mode dial with [F] (Time Lapse).
2.
Press [SET].
3.
Use [8] and [2] to select the
and then press [SET].
This displays a menu of Time Lapse scenes.
4.
Use [8], [2], [4], and [6] to select "
[SET].
5.
Press [SET], use [8] and [2] to select the
Panel option, and then press [SET].
6.
Use [8] and [2] to select "
then use [8] and [2] to change the setting.
Interval
Shots
7.
Press [SET].
• The current Interval Shot settings are shown at the
bottom of the monitor screen.
8.
Press the shutter button to start recording.
• Shooting is repeated at the interval specified in
step 6.
• Recording stops when the recording time specified
in step 6 elapses or when the shutter button is
pressed again.
D
(Time Lapse) Control Panel option,
Interval Shot", and then press
Interval" or "
Specifies the shooting interval.
Specifies the number of shots.
70
(Interval Setting) Control
Shots", press [6], and
Interval
Number of shots
Remaining
shooting time
Snapshot Tutorial
Advertisement
Table of Contents
