Installation With The Rubber Bush; Removing The Unit - Pioneer ANH-P9R-BK Installation Manual

Installation

Installation with the rubber bush

Dashboard
182
53
Holder
After inserting the holder into the dash-
board, then select the appropriate tabs
according to the thickness of the dash-
board material and bend them.
(Install as firmly as possible using the top
and bottom tabs. To secure, bend the tabs
90 degrees.)

Removing the unit

Rubber bush
Screw
Fig. 7
Pull out to remove the frame.
(When reattaching the frame, point
the side with a groove downwards
and attach it.)
Insert the supplied
extraction keys into the
unit, as shown in the
figure, until they click
into place. Keeping the
keys pressed against
the sides of the unit,
pull the unit out.
Frame
Fig. 8
Fig. 9
15
En