Bravo Two Models - MerCruiser 496 MAG Owner's Manual

Section 5 - Maintenance
NOTE: The propeller torque stated is a minimum torque value.
Description
Bravo One propeller nut
NOTE: Bravo One XR models do not use the tab washer.
4. Models equipped with the tab washer: Continue to tighten the propeller nut until the three tabs on the tab washer align with
the grooves on the spline washer.
5. Bend the three tabs down into the grooves.
a
b

Bravo Two Models

IMPORTANT: Use the correct rotation propeller. The propeller rotation must match the direction of rotation of the propeller shaft.
1. Coat the propeller shaft spline with one of the following Quicksilver lubricants.
Tube Ref No.
Special Lubricant 101
34
2-4-C Marine Lubricant
95
with Teflon
Anti-Corrosion Grease
94
NOTE: Anti‑corrosion grease is for salt water applications only.
2. Install the propeller with the attaching hardware as shown.
Page 80
a
b
d e
c
a - Prop
b - Tab washer
d c - Drive sleeve adapter
d - Tab bent down
e - Propeller nut
e
4750
Description
Bravo One XR models
a - Propeller shaft
b - Propeller hub insert with snubbers
c - Propeller
d - Thick washer
e - Washer
f g
f - Washer
g - Propeller nut
19816
Where Used
Propeller shaft splines
Propeller shaft splines
Propeller shaft splines
Nm lb. in. lb. ft.
75 –
Part No.
92-802865Q02
92-802859A 1
92-802867Q 1
90-899883274 MARCH 2008
55