Zero Effort Features; Remote Controls (Dts Models); Remote Controls; Panel Mount Features - MerCruiser 496 MAG Owner's Manual

Control Handles - Operation of the the shift and throttle are controlled by the movement of the control handle. Push the control
handle forward from neutral with a quick firm motion to the first detent for forward gear and continue pushing forward to increase
speed. Pull the control handle back from neutral with a quick firm motion to the first detent for reverse gear and continue pushing
back to increase speed.
Control Handle Tension Adjustment Screw - (not visible) This screw is used to adjust the effort required to move the remote
control handle. Refer to instructions provided with remote control for complete adjustment instructions.
Power Trim Switch - See Power Trim section for detailed power trim operating procedures.
Trailer Switch - Used to raise drive unit for trailering, launching, beaching or shallow water operation. See Power Trim for detailed
trailer switch operation.

Zero Effort Features

a
Shift Lever - Shift functions are controlled by the movement of the shift lever. Shift into reverse by moving the shift lever to its aft
position. Shift into neutral by moving the shift lever to its center position. Shift into forward by moving the shift lever to its forward
position.
Throttle Lever - Throttle functions are controlled by the movement of the throttle lever. Increase the RPM by moving the throttle
lever forward. Achieve Wide Open Throttle (WOT) by placing the throttle lever in its full forward position. Decrease RPM by moving
the throttle lever back. Achieve minimum RPM (idle) by placing the throttle lever in its full aft position.
Trim/Tilt Switch - Refer to Power Trim.

Remote Controls (DTS Models)

Remote Controls

IMPORTANT: Your boat must be equipped with a Mercury Marine electronic remote control. Start in gear protection is provided
by this control system and prevents the engine from starting when the control is actuated in forward or reverse. Refer to the Mercury
Precision Parts/Quicksilver Accessories Guide.
The Digital Throttle and Shift System (DTS) required to operate this engine package provides start and stop functions, throttle
control, shift control, start in gear protection, and emergency lanyard stop functions. The DTS system works with specialized helm
components such as a command module kit and electronic remote control. Consult your dealer for a description and/or
demonstration of your remote control.

Panel Mount Features

c
b
a
90-899883274 MARCH 2008
b
d
e
-
+
f
g
Section 2 - Getting to Know Your Power Package
c
a - Lanyard stop switch
b - Control handle
c - Shift lock
d - Trim/tilt switch
e - Throttle only button
h
f - Start/stop button
g - Detent tension adjustment screw
h - Control handle friction adjustment screw
3409
a - Shift ever
b - Throttle lever
c - Trim/tilt switch
5656
Page 23