12
BRAKE SYSTEM
12.10
Checking rear brake fluid level
Warning
Danger of accidents Failure of the brake system.
–
If the brake fluid level falls below the MIN mark, this indicates a leakage in the brake system or worn-out brake linings. Check
the brake system and do not continue riding. (Your authorized KTM workshop will be glad to help.)
–
Loosen fitting
–
To adjust the basic position of the foot brake lever individually, loosen nut
screw
accordingly.
2
Info
The range of adjustment is limited. The screw must be screwed into the footrest
bracket by at least four turns.
–
Position foot brake cylinder
Hold screws
Guideline
Screw connection, foot brake cylinder
–
Check the free travel of the foot brake lever. (
–
Tighten nut
B01291-10
on foot brake cylinder
3
4
so that the foot brake lever has the necessary free travel.
4
in place and tighten the nuts.
3
.
1
.
M6
10 Nm (7.4 lbf ft)
p. 103)
104
and turn
1