Operational Reference
Using CamExpert with Linea GigE Cameras
The Sapera CamExpert tool is the interfacing tool for GigE Vision cameras, and is supported by the
Sapera library and hardware. When used with a Linea GigE camera, CamExpert allows a user to
test most of the operating modes. Additionally CamExpert saves the Linea GigE user settings
configuration to the camera or saves multiple configurations as individual camera parameter files
on the host system (*.ccf).
An important component of CamExpert is its live acquisition display window which allows
immediate verification of timing or control parameters without the need to run a separate
acquisition program.
Click on any parameter and a short description is displayed below the Category pane. The same
context sensitive help is available by clicking on the
configuration parameter. Click on the
information on CamExpert.
Note: The examples shown may not entirely reflect the features and parameters available from the camera
model and camera mode used in your application.
CamExpert Panes
The various areas of the CamExpert tool are described in the figure below. GigE Vision device
Categories and Parameter features are displayed as per the device's XML description file. The
number of parameters shown is dependent on the View mode selected (Beginner, Expert, Guru –
see description below).
24 Operational Reference
button then click on a camera
button to open the help file for more descriptive
Linea GigE Series Camera