LG RCWFL Series Installation Manual page 37

Appendix
1. Installation Checklists
• Inspection before Installation
NO
Have you acquired information related to equipment installation of the site for Chiller?
1 (heat source flow diagram, machine room layout diagram, foundation drawing, electric
drawing)
Have you acquired the general progress schedule related to the Chiller and surrounding
2
construction? (Check equipment delivery and piping connection schedule)
3 Have you check the size of equipment entrance?
4 Have you established bring in flow and delivery plan of the equipment?
5 Is the skid size and height enough? (Check the machine room and drawing)
6 Is there any obstacle in the installation place? (drain in the machine room)
Have you maintained distance from the inflammables?
7
(Domestic high pressure license)
• Chiller
NO
1 Are parts of the Chiller received properly?
Have you checked external damage of the equipment or internal connection abnormality
2
during transportation?
3 Has the refrigerant leaked after sealing? (check the refrigerant pressure)
4 Is the heat insulation of equipment such as the evaporator and economizer strong?
Are the directions of the cold water and coolant inlet/outlet of the Chiller the same as
5
the design drawing?
6 Has the horizontality of the Chiller secured?
7 Has the anti-vibration rubber pad installed?
• Piping
NO
1 Have all piping installed and connected as the installation guideline?
2 Have ventilation pipe and inlet/outlet of the cold water and coolant connected properly?
3 Have you implemented removal of foreign substances in the piping and air purge work?
Have the connection parts of water piping of the Chiller constructed as the drawing?
4
(strainer, flexible, balancing valve, pressure gauge, etc.)
5 Is the heat insulation of the piping, flange and valve strong?
** Result: good O, Defective: X, Not Applicatble: N/A
Inspection items
Inspection items
Inspection items
37
Result Note
Result Note
Result Note