U8860
Maintenance Manual
6. Tighten the two screws (Note: The screws lie in the
position where the sucker sucks the TP BTB).
7-1. Note: Put the sucker in the opposite direction of
the receiver.
Issue 1.0 (2011-11-14)
7. Put the sucker in the middle of the TP Icon and press
the sucker tightly.
8. Slowly suck up the TP and stop sucking until half of
the TP is sucked up.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
7 Disassembly Procedure
22