O P E R A T I N G Y O U R V E H I C L E
NOTE:
A new engine will consume some oil during the first few thousand miles (kilometers) of operation.
This should be considered a normal part of the break-in and not interpreted as a sign of difficulty.
TURN SIGNALS/HEADLIGHTS/HIGH BEAMS LEVER
The Turn Signal/Headlight Lever is located on the left side of the steering column.
Turn Signal/Headlight Lever
1 — Headlights
2 — Turn Signals
3 — High Beams
4 — Flash To Pass
Turn Signals/Lane Change Assist
Tap the lever up or down once and the turn signal (right or left) will flash five times and
automatically turn off.
Headlights/Parking Lights
Rotate the end of the lever to the first detent for parking lights and the second detent for the
headlights to operate.
NOTE:
The ignition switch must be in the ON/RUN position for the headlights to operate.
High Beam Operation
Pull the multifunction lever toward you to switch the headlights to high beam. Pull the multifunction
lever a second time to switch the headlights back to low beam.
A high beam symbol will illuminate in the cluster to indicate the high beams are on.
21