Dip Switch Setup - Samsung SCC-C6323N User Manual

DIP SWITCH SETUP

Before you install the camera, you should set the DIP
switches to confi gure the camera ID, Baud rate, and
communication protocol.
Protocol
Auto Select
ID Setting (1~255)
❖
Camera ID Setup
• ID number of camera is set using binary number.
The example is shown bellow.
Pin 1 2
ID Value 1 2
ex) ID=5 on off
ex) ID=10 off on
• The range of ID is 0~255. Factory default of
Camera ID is 1.
• If you want to control a certain camera, you must
match the camera ID with Cam ID setting of DVR
or Controller.
❖
Communication Protocol Setup
ON
ON
1 2 3 4
Buad Rate
RS-485
Terminate
3 4 5 6 7 8
4 8 16 32 64 128
on off off off off off
off on off off off off
5 6 7 8
Installation
• Select the appropriate Protocol with DIP switch
combination.
Switch State
Pin1 Pin2 Pin3 Pin4
OFF OFF OFF
ON OFF OFF
OFF ON OFF
ON ON OFF
• If you set the protocol as Auto Protocol, camera
will automatically recognize the kind of Protocol.
• Auto Protocol supports Pelco-D and Samsung Protocol.
• If you want to control using DVR or system
keyboard, their protocol must be identical to
camera. Otherwise, you can not control the camera.
• If you changed camera protocol by changing DIP S/W,
the change will be effective after you reboot the camera.
• Factory default of protocol is "Auto Protocol
❖
Communication Baud rate Setup
ON
ON
1 2 3
• Select the appropriate Baud rate with DIP switch
combination.
Switch State
Pin5 Pin6
OFF OFF
ON OFF
OFF ON
ON ON
OFF OFF
• Factory default of Baud rate is "9600 BPS"
Protocol
OFF Auto Protocol
OFF Pelco-D
OFF Pelco-P
OFF Samsung
4 5 6 7 8
Protocol
Pin7
OFF 2400 BPS
OFF 4800 BPS
OFF 9600 BPS
OFF 19200 BPS
ON 38400 BPS
English – 13