Download Print this page

Battery Replacement - Omega Engineering OM-EL-USB-LITE Instruction Sheet

Temperature data logger
Hide thumbs Also See for OM-EL-USB-LITE:

Advertisement

LED FLASHING MODES
OM-EL-USB-LITE features a bi-colour LED to indicate the status of the data logger. To save power, the status indication only operates
when the push button is pressed for a short while.
The numbe r of flashes and colours indicates :
( Single green flas h)
( Single r ed flash)
( Double red flas h)

BATTERY REPLACEMENT

We recommend that you replace the battery every 1 month, or prior to logging critical data. The OM-EL-USB-LITE does not lose
its stored readings when the battery is discharged or when the battery is replaced; the data logging process will however be
stopped and cannot be re-started until the battery has been replaced and the logged data has been downloaded to PC.
For maximum logging life, use only Omega model no. OM-EL-BATT-LITE replacement battery. Before replacing the battery,
remove the OM-EL-USB-LITE from the PC.
N ote:
Leaving the OM-EL-USB-LITE plugged into the USB port for longer than necessary will cause some of the battery capacity to be lost.
WARNIN G: Handle lithium batteries carefully.
The channel is logging, no alarm
The channel is logging, low alarm
The channel is logging, high alarm
Dispose of in acc ordance with local regulations.
Temperature sensor
Red/Green LED

Advertisement

loading