Maintenance; Changing Battery Pack; Changing Tires; Care & Maintenance - ACTON R6 ROCKETSKATES Owner's Manual

V. MAINTENANCE
A. Changing Battery Pack
Warning: Take precautions when changing the battery.
It should only be done in an indoor environment.
1. Unscrew four bolts from the front.
2. Carefully pull the battery pack out from the top
and the bottom, don't stretch the wires.
3. Disconnect three connectors from the battery pack,
you may change the battery pack following the reversed order.
B. Changing Tires
When tires wear down or the rim is scratched, it is possible to purchase spare tires
through our website and change them with the following procedure:
1. Unscrew the 6 bolts on the wheel hub.
2. Slide the rim off and rotate a small angle to take it off.
3. Fit the new tire back and make sure it's fit in the correct position before tighten the
screws back in.
C. Care & Maintenance
Clean the surface of RocketSkates™ with rinsed soft cloth only. Store RocketSkates™ in
indoor and cool environment. Recharge the battery at least once every 2 month and
avoid contacting with volatile liquids including Alcohol or strong clean agents.
VI. TROUBLESHOOTING
If you believe the RocketSkates™ is not running properly, stop using them immediately.
In most cases, by turning both skates off for 10 seconds and restarting them would
solve the issue.
If you find other problem or restarting the RocketSkates™ can't resolve the issue, refer
to the following chart for common troubleshooting methods. If the problem still exists,
please stop using the RocketSkates™ and contact us.
The ACTON App for Rocketskates™ can monitor the performance of the skates and
record error codes from the skates. Please sumbit error codes to us in the Feedback
section of the app.
11