Powering On Or Off; Charging Your Device; Phone Overview - Alcatel 2017B Manual

b Slide the battery down into the battery cavity until it locks into place.
c To remove, lift the battery out of the cavity from the lower left corner.
1.1.4 Removing or Installing the microSD Card
a Open the microSD card protector according to "OPEN" indicating arrow, insert
the microSD card into the slot with chip facing downward.
b Cover the slot according to "LOCK" indicating arrow.
c To remove the microSD card, open card protector, gently press it out, and then
cover the slot.
1.2

Powering On or Off

1.2.1 Power On Your Phone
a Press and hold the key until the phone powers on.
b Enter your PIN code if necessary and then press and hold the
c The Home screen is displayed.
If you don't know your PIN code or if you have forgotten it, contact your
service provider.
1.2.2 Power Off Your Phone
Press and hold the key from the Home screen.
1.3

Charging Your Device

key.
5
When the phone is plugged, the light at the front cover of the phone indicates it's
charging.
a Plug the AC Charger into a standard outlet.
b To access the charging port on the lower left side of your phone, open the flap
and plug the other end of the AC charger into the charging port.
• Charging may take about 10 minutes to start if the battery is completely dead.
• Be careful not to force the plug into the socket.
• Make sure the battery is correctly inserted before connecting the charger.
• Use a wall socket that is easily accessible and in close proximity to the phone
(avoid electric extension cables).
• When using your phone for the first time, charge the battery fully (approximately
3 hours). When the battery is fully charged the
To reduce power consumption, when the battery is fully charged, disconnect
your phone from the AC Charger and the charger from the wall outlet.
Switch off some applications when not in use; reduce the backlight time, etc.
1.4

Phone Overview

will display on the screen.
6