Table of Contents
Advertisement
MAINTENANCE WORK ON FRAME AND ENGINE
–
Push the rear wheel as far forward as possible and place the chain on the rear sprocket.
–
Pull the rear wheel back and insert the axle.
700315-01
–
Place the chain adjuster
–
Position the chain adjuster
–
Tighten nut
Guideline
In order for the rear wheel to be correctly aligned, the markings on the left and right
chain adjusters must be in the same position relative to the reference marks
Nut, rear wheel spindle
700316-01
–
Operate the foot brake lever repeatedly until the brake linings press up against the
brake disc and there is a pressure point.
–
Take the rear from the work stand. (
–
Check the chain tension. (
on the tensioning screw.
and place it on the tensioning screw.
.
M25x1.5
p. 111)
p. 138)
90 Nm
Thread greased
(66.4 lbf ft)
159
.
Advertisement
Table of Contents
