Resolution; Hdmi Format; Video Out Signal; Audio - Samsung HT-F450 User Manual

If you want to change the resolution in BD Wise mode,
\
you must set BD wise mode to Off in advance.
BD Wise will be disabled if the product is connected
\
to a device that does not support BD Wise.

Resolution

Sets the output resolution of the HDMI video signal.
The i and p indicate interlace and progressive scan,
respectively.
• 576p(480p), 720p, 1080i, 1080p, BD Wise
| NOTE |
The BD Wise menu item appears only if BD Wise is
\
set to On.
Depending on your TV, certain HDMI output
\
resolutions may not work. Please refer to the user's
manual of your TV.
If Composite is connected, the resolution supports
\
only 576i(480i).
1080P may not appear depending on TV.
\

HDMI Format

Lets you set the colour space format for the HDMI output
to match the capabilities of the connected device (TV,
monitor).

Video Out Signal

Different countries apply different TV standard.
You can select from NTSC or PAL.

Audio

Simple Setup

It is the Function for selecting the Speaker Layout
suitable with the layout type of the connected Speaker.
That is two path to select:
1. Settings  Audio  Simple Setup
2. Settings  System  Initial Setting  Simple
Speaker Setup
• Normal Mode: Use this option when the surround
speakers are located behind you.
• Simple Mode: Use this option if the surround speakers
are located in front of you.
If Simple Mode is selected, Speaker Setting cann't be
\
set.

Speaker Setting

Speaker Size
You can set the Speaker Size of the Center and Surround
Speakers, as well as Test Tone in this mode.
Sound Edit
You can adjust the balance and level for each speaker.
Press the ▲▼ buttons to select and adjust the desired
speaker.
Press the ◄► buttons to adjust the settings.
Delay Time
If the speakers cannot be placed at equal distances from
the listening position, you can adjust the delay time of the
audio signals from the Center and Surround speakers.
You can also set the Test Tone in this mode.
| NOTE |
The Delay Time menu will be activated only when a
\
5.1 channel source is played.
You can not set Center and Surround in this mode
\
when their Speaker Size is set to NONE.
With AC-3, the delay time of surround can be set
\
between 00 and 15mSEC.Center only can be set
between 00 and 5mSEC.
The Center channel is only adjustable on 5.1 channel
\
discs.
Test Tone
Use the Test Tone feature to check the speaker
connections.
• Press the ◄► buttons to select On.
• The test tone will be sent to Front Left  Center 
Front Right  Surround Right  Surround Left 
Subwoofer in order.
To stop the test tone, press the v button.

DRC (Dynamic Range Compression)

This feature balances the range between the loudest and
quietest sounds. You can use this function to enjoy Dolby
Digital sound when watching movies at low volume at
night.

AUDIO SYNC

Video and audio sync may not match with digital TV. If
this occurs, adjust the audio delay time to match the
video.

Speaker Selection

• Video is transmitted over the HDMI connection cable
only, and audio is output through the product speakers
only.
 Select the Home Theater.
• Both video and audio signals are transmitted over the
HDMI connection cable, and audio is output through
your TV speakers only.
 Select the TV Speaker.
15
|
English