Dell Inspiron 3700 Reference Manual page 74

Installing Devices in the Media Bay Without Softex Docking Services or Softex BayManager Software
To install a device in the media bay, perform the following steps:
1. Verify that the Diskette Reconfig
2. Save your work and close all open files and application programs.
3. Turn your computer off.
4. If the computer is docked, undock it.
5. If the media bay contains a device, remove the device as follows:
a. Close the computer display and turn the computer over.
b. Slide the media bay latch toward the Unlock icon.
Keep holding the media bay latch with one hand while pulling the device out of the bay with the other hand.
c. After you remove the device, release the media bay latch.
6. Slide the new device firmly into the media bay.
You should hear a click when the device is fully seated.
7. Dock the computer if necessary.
8. Turn on the computer.
Setting Up a Second Hard-Disk Drive
The first time you install a second hard-disk drive in the media bay, you must format that drive. For instructions, see the documentation that came
with the device.
Back to Contents Page
option in the System Setup program is set to Any Time.