Table of Contents
Advertisement
Installation
1. Precautions
Choose the mounting location carefully so that the unit will not interfere with the
normal driving functions of the boat.
Avoid installing the unit where it would be subject to high temperature, such as from
direct sunlight or hot air, or where it would be subject to dust, dirt or excessive
vibration. Use only the supplied mounting hardware for a safe and secure installation.
Be sure to remove the front panel before installing the unit.
2. Mounting angle adjustment
Adjust the mounting angle to less than 20 degrees from horizontal.
3. Mounting example
1
3
Bend these claws, if necessary.
Note: Keep the release key in a safe place as you may need it in future to remove
the unit from the boat.
4. Attaching the Trim Ring
- Attach the Trim Ring to the Radio after installing.
- Be sure to insert the Trim Ring in the correct direction.
<< Installation in the cabinet >>
2
Release Key
4
Tap
Half Cabinet
5
Advertisement
Table of Contents
