Table of Contents
Advertisement
Error
The device does not switch on.
No sound
Hiss in FM mode
No stations
available/burbling/intermittent in
DAB mode.
Alarm does not work.
Electro-Magnetic Interference.
All other undetermined cases.
Remedy
Check if the power adaptor is connected properly with
power supply.
1. Turn on the sound as it may be muted.
2. Increase the volume.
1. Check/move the FM antenna.
2. Move the radio.
3. Draw out the wire antenna and try different direction.
1. Move the radio.
2. Draw out the wire antenna and fix it in vertical
direction.
3. Rescan local stations only (high-strength).
4. Check the local DAB coverage.
1. Switch on the alarm.
2. Due to the volume setting, refer to the solutions of "No
sound".
The normal function of the product may be disturbed by
strong Electro-Magnetic Interference. If so, simply reset
the product to resume normal operation by following the
instruction manual. In case the function could not resume,
please use the product in other location.
Switch off, and then switch on again if necessary.
Advertisement
Table of Contents
