Kitchen Radio with DAB+ KCR-004 DAB+ User Manual www.lenco.com Thank you very much for buying the KCR-004 DAB+. In order to let you freely operate the product and fully enjoy the overbalancing happiness it brings you, we have introduced each function of the player in detail in this user manual.
Table of Contents Safety Precautions Appearance and Key Descriptions Getting Started KCR-004 DAB+ Functions Main Menu and Settings Preset AUX-IN Troubleshooting Specifications...
Safety Precautions Do not drop the KCR-004 DAB+ and do not expose it to liquid, moisture or humidity. These might lead to damage to the device. If the KCR-004 DAB+ is moved from a cold environment into a warmer one, let it adapt to the new temperature before operating the device.
Description Functions LCD Screen Display Buttons and Knobs Basic control of operation Remote Receiver Infra-red reception interface for remote control On/Off Switch Power on/off AUX In 3.5mm jack for AUX IN Line Out 3.5mm jack for speaker connection DC IN Power supply Remote Controller...
English English Standby button Standby button + Volume up button + Volume up button ◄ Left cursor button ◄ Left cursor button - Volume down button - Volume down button MODE MODE Go to main menu items Go to main menu items EQ Set tone EQ Set tone Alarm set button...
Remember to pull out the clear plastic tab from the battery compartment before using the remote. To remove the battery from the remote, use your thumb to pull out the battery tray. Replace it with a CR2025 type 3V battery, taking care to insert it with the positive (+) side up.
Decide on the installation location and installing the unit based on the best cabinet/shelf. Attach the metal bracket under the cabinet/shelf with the supplied mounting screws. If the board thickness of cabinet/shelf is thinner than the screw’s height, you can supply the suitable screw by yourselves.
During standby mode, press and hold or press on the remote control to turn the radio to operation mode. KCR-004 DAB+ Functions on the remote contol to swap among the modes below: DAB FM Press AUX DAB FM … When it is on the playback display, rotate the knob or press on the remote control to adjust the volume.
control to select and press to confirm - On/off: Turning on or off. Time: Adjusting the hour and minute. Mode: Choosing Daily, Weekdays, Weekends or Once. Type: Selecting the alarm sound, BEEPER, DAB or FM. (for DAB and FM, the alarm will be the last listened station).
Set Timer Setup the Timer hh:mm:ss. The maximum time is 2 hours. Hour (hh): from 00 to2. Minute (mm): from 00 to 59. Second (ss): from 00 to 59, each step is 01. For each one, press on the remote control to select and press to confirm.
Set date: dd-mm-yyyy. Set the date manually. Auto update: From radio or No update. If it is set to be updated from radio, the radio automatically update the time and date from DAB or FM RDS even you have set the time and/or date.
The first row of the text is the name of the DAB station. The second row shows the details of the station, press on the remote control to view the frequency, bit rate, signal strength and the programme type of the station and today’s date.
Press and hold on the remote control to adjust the frequency speed. Once you release the button, the radio will stop at that frequency. Alternatively, press and hold on the remote control to do scanning. The default is scanning up the frequency unless your last operation was adjusting the frequency downward (after pressing Preset In DAB or FM mode, there are 10 presets for each mode.
Error Remedy The device does not switch on. Check if the power adaptor is connected properly with power supply. No sound 1. Turn on the sound as it may be muted. 2. Increase the volume. Hiss in FM mode 1. Check/move the FM antenna. 2.
For helpdesk support and more information, please visit: www.lenco.com Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send products that need repairs to Lenco directly.
and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. The declaration of conformity may be consulted at https://lencosupport.zendesk.com/forums/22413161-CE-Documents This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries.