Brother MFC-8460N User Manual page 119

Error Message
Toner Error
Toner Life
End
Toner Low
Too Many
Trays
Unable to
Init.
(Initialize)
Unable to
Print
Unable to
Scan
Downloaded from ManualsPrinter.com Manuals
Cause
The toner cartridge and drum unit
assembly is not installed properly.
The toner cartridge and drum unit
assembly is not installed properly,
or the toner cartridge is used up
and printing is not possible.
If the LCD shows Toner Low, you
can still print, however, the
machine is telling you that the toner
cartridge is near the end of its life
and the toner will soon run out.
More than one optional tray is
installed.
The machine has a mechanical
problem.
The machine has a mechanical
problem.
Document is too long for duplex
scanning.
Troubleshooting and routine maintenance
Action
Reinstall the toner cartridge.
Do one of the following:
Re-install the toner cartridge and drum unit
assembly.
Replace the toner cartridge with a new one.
(See Replacing the toner cartridge (TN-
3130/TN-3170) on page 121.)
Order a new toner cartridge now.
Maximum number of optional trays is one.
Remove additonal tray(s).
Turn off the machine's power switch and then on
again. If the error message continues leave the
machine for several minutes and then try to print,
copy or scan again. (The machine can be turned
off for up to 4 days without losing faxes stored in
the memory. See Checking if the machine has
faxes in its memory on page 110.)
Turn off the machine's power switch and then
turn it on again. If the error message continues
leave the machine for several minutes and then
try it again. (The machine can be turned off for
up to 4 days without losing faxes stored in the
memory. See Checking if the machine has faxes
in its memory on page 110.)
Press Stop/Exit. Use the suitable size of paper
for duplex scanning. See Scan on page 152.
109