HCP QR201 User Manual page 5

8. Adjust the barcode scanner
NOTE
For advanced settings QR201 used applications "UniversalMenuTool2D".
QR201 can connect to PC as a HID device (as a standard PC keyboard without installing drivers)
or as open COM port on the computer for which it is necessary to install the appropriate drivers.
Drivers are on CD that goes with the device or you can downloaded it from website www.hcp.rs or
from forum www.hcp.rs/forum.
If you want to QR201 connect to the computer on open COM port, you need to scann 2D barcode
bellow which writes "USB-COM" (it is necessary install drivers from CD) and if you want to QR201
connect as a HID device, you need to scann 2D barcode bellow which writes "USB-HID".
5 od 10