Samsung GT-P6800 Servise Manual page 30

7. Level 2 Repair
9
attach the Right and Left side speaker module
after removing the release paper of speaker
modules. and then solder the speaker modules
on the PCB of 30 pin IF connector.
1) Be careful not to make scratch and molding damage!
11
Assemble the connector main IF
FPCB(Connector to connector) after placing the
Battery.
1) Be careful not to make scratch and molding damage!
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
10
Assemble speaker assembly module on LCD
Bracket after removing the release paper on
the LCD Bracket.
1) Be careful not to make scratch and molding damage!
12 Assemble the Battery connector after screwing
13 screws.
1) Be careful not to make scratch and molding damage!
7-6