Dell M409WX User Manual page 20

1
Power
2
Enter
3 Right
4
Down
5 Aspect Ratio
6
Page up
7 Mute
8
Page down
9 Video mode
10 Blank screen
11 Up
12 Left
13 Menu
14 Volume up
15 Laser
16 Volume down
17 Keystone adjustment Press to adjust image distortion caused by tilting
18 Source
20 Using Your Projector
Downloaded From projector-manual.com DELL Manuals
Turns the projector on and off. For more
information, see Turning Your Projector On on
page 13 and Turning Your Projector Off on
page 13.
Press to confirm the selection.
Press to adjust the OSD setting.
Press to select OSD items.
Press to change aspect ratio of a displayed image.
Press to move to previous page.
Press to mute or un-mute the projector speaker.
Press to move to next page.
The Dell M409WX Micro-projector has preset
configurations that are optimized for displaying
data (PC Graphics) or video (movies, games,
etc.). Press the Video Mode button to toggle
between PC mode, Movie mode, Game Mode,
sRGB, or CUSTOM mode (for user to setup and
save preferred settings). Pressing the Video Mode
button once will show the current display mode.
Pressing the Video Mode button again will switch
between modes.
Press to hide/unhide the image.
Press to select OSD items.
Press to adjust the OSD setting.
Press to activate the OSD.
Press to increase the volume.
Point the remote control at the screen, press and
hold the laser button to activate the laser light.
Press to decrease the volume.
the projector. (+40/-35 degrees)
Press to switch between Analog RGB, Composite,
Component (YPbPr, via VGA), HDMI, and S-
video sources.