Viewing Photos - Technika CR129 User Manual

VIEWING PHOTOS

Your picture frame can display photos stored in the following
memory stores -
• On a compatible Flash Card (SD/MMC/MS) as used in
most digital cameras.
.
• On a USB Drive
• Non-removable Internal memory.
If there is no Flash Card or USB drive loaded, the display will
show photos from the Internal memory (or the 'Technika'
logo if there are no photos loaded into the Internal memory).
When an external Flash memory photo store is loaded, a
slideshow of the photos from this store will automatically
begin. This slideshow will continue, even if you insert flash
memory into the other Flash memory slot.
Selecting from a different photo store:
If a flash memory store is loaded, press the SOURCE button
repeatedly to view photos stored on the flash memories in
the sequence -
LOADING FLASH MEMORY
To load a compatible Flash Card:
• Gently insert the Flash Card into the Flash Card slot on the
side of the unit. If the Flash Card is marked with an arrow
this should be aligned to the back of the unit.
NOTE:- Flash Cards are polarised and can only be inserted one
way round. If the Flash Card will not load easily you may need
to reverse it. Never force a Flash Card into the Card Reader
slot.
To connect a USB flash drive:
• Insert the drive into the USB jack on the side of the unit.
NOTE: Most USB Mass storage devices are supported by the
USB connection including Flash drives, Memory sticks, Jump
drives etc. If your Mass storage device requires a battery/
power source, ensure that the battery is fitted/charged
before connection.
7
SLIDESHOW CONTROL
You can also display your photos using the full screen of the
Picture Frame display.
To switch to full-screen photo display:
• Press the PHOTO button.
The slideshow will now fill the screen of the Picture Frame.
NOTE:-The alarm will continue to function when a full-screen
slideshow is displayed.
NOTE:- The radio cannot be played at the same time as a full-
screen photo slideshow.
SLIDESHOW CONTROL
Stopping the slideshow:
• While the slideshow is running, press the
The slideshow will stop, displaying the current photo.
Changing to another photo:
• Press the O or P button to select the previous or next
photo in the slideshow sequence.
Rotating a photo:
• Press the N button repeatedly.
The photo displayed will rotate 90 ° with each press.
NOTE:- The photo will return to normal orientation when the
slideshow continues.
Re-starting the slideshow:
OK button to switch to thumbnail mode.
• Press the
• Follow the instructions in the next section from
'Navigating to a picture' to choose a photo and re-start
the slideshow.
OK button.