License Plate Lamp
To replace one of these bulbs:
A. Bulb Socket
B. License Plate Bulb Assembly
C. Screws
1. Remove the two screws (C) securing the license
plate bulb assembly (B).
2. Turn the bulb socket (A) counterclockwise and pull
the bulb straight out of the socket.
6-58
3. Install the new bulb.
4. Reverse steps 1 and 2 to reinstall the license plate
bulb assembly.
Replacement Bulbs
Exterior Lamp
Back-up, Rear Parking,
Stoplamp, and Turn Signal Lamp
Center High Mounted
Stop Lamp (CHMSL)
Front Parking and Turn
Signal Lamp
Front Sidemarker Lamp
License Plate Lamp
Headlamps
Composite High-Beam
Headlamp
Composite Low-Beam
Headlamp
Sealed Beam Headlamp
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
3157
912
3157KX
194
194
9005
9006GS
H6054