Replacing the display panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
CAUTION: Place the computer on a soft and clean surface to avoid
scratching the display.
1
Align the display panel on the display-back cover and snap the display
panel into place.
2
Route the display cable through the routing guide on the left hinge.
3
Route the sensor-board cable through the routing guide on the right
hinge.
Post-requisites
1
Replace the
display
2
Replace the
wireless
3
Replace the battery.
4
Replace the
base
computer. After working inside your
assembly.
card.
cover.
After working inside your
75